King-kooker Fire Pit Manuel d'utilisateur télécharger pdf (Page 9)

TOOLS REQUIRED:

TORQUE WRENCH or ADJUSTABLE WRENCH, LEAK TESTING SOLUTION

1. Before assembling, check that all components are included in the shipping carton. Accessories

may vary according to model. Check the list of accessories on your box. The following parts are

considered essential and should be included in your package regardless of model number.

Required Parts Lists:

Fire Pit Frame, Fire Pit Bowl with installed burner, Brass Fitting with Manual Valve and LP

Hose and Regulator, Lava Rock (20 lb.), Sandbag

If any of the above parts are missing, contact Metal Fusion, Inc. at 1-800-783-3885 between the

hours of 7:30 a.m. and 3:30 p.m. CST Monday through Friday for replacements.

2. Read assembly instructions, and understand sequence of assembly, before commencing to

assemble your appliance.

3. Remove the fire pit bowl with installed burner from the fire pit frame. Remove and discard all

protective packing materials. Re-insert the fire pit bowl with installed burner into the fire pit frame

(the burner’s venturi tube should be inserted through the hole located on the side of the fire pit

frame.) Use caution when removing and inserting the fire pit bowl with installed burner as the

fire pit bowl and burner can be damaged if mishandled.

SECTION I

FIRE PIT ASSEMBLY

THE USE AND CARE MANUAL MUST BE READ AND UNDERSTOOD

BEFORE USING THE APPLIANCE

Throughout this manual the words appliance, burner and fire pit will be used interchangeably to

refer to the King Kooker

Outdoor Fire PIt.

FIRE PIT FRAME

FIRE PIT BOWL

VENTURI

BURNER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Pas de commentaire

King-kooker Fire Pit Manuel d'utilisateur Page 9